How Do I Replace a Battery in a Subaru Keyless Fob?

How Do I Replace a Battery in a Subaru Keyless Fob

How Do I Replace a Battery in a Subaru Keyless Fob?

Replacing a battery in your Subaru keyless fob is a simple process involving removing the fob’s cover, swapping the battery, and reassembling the fob; it’s easier than you think and will save you a trip to the dealer! Here’s how do I replace a battery in a Subaru keyless fob successfully.

Why You Should Replace Your Subaru Key Fob Battery Yourself

Modern car ownership increasingly relies on keyless entry systems, making the key fob a critical component. A dead or dying battery in your Subaru key fob can be a major inconvenience, leaving you stranded or unable to access your vehicle remotely. Knowing how do I replace a battery in a Subaru keyless fob yourself offers several benefits:

  • Cost Savings: Dealerships often charge a premium for this simple service.
  • Convenience: Avoid scheduling an appointment and waiting at the dealership.
  • Time Efficiency: The entire process usually takes only a few minutes.
  • Self-Reliance: Gaining confidence in basic car maintenance.

Understanding Subaru Key Fob Types

Subaru uses several types of key fobs, and while the basic battery replacement principle remains the same, the specific method for opening the fob may vary. The two most common are:

  • Flip Key Fob: Features a physical key that folds out.
  • Standard Key Fob (push-button start): Does not have a visible physical key (though it usually has an emergency key hidden inside).

It’s essential to identify your fob type before proceeding. This guide will cover both types.

Gathering the Necessary Tools and Materials

Before you begin, gather the following:

  • New Battery: Most Subaru key fobs use a CR2032 battery. Check your owner’s manual or the old battery for confirmation.
  • Small Flathead Screwdriver (or similar thin, flat tool): For prying open the fob. A plastic trim tool is ideal to avoid scratching the casing.
  • Soft Cloth or Paper Towel: To protect the fob’s surface during disassembly.

Step-by-Step Guide: Replacing the Battery in a Subaru Flip Key Fob

  1. Locate the Emergency Key Release: On the back of the fob, find a small button or latch. Press or slide it to release the emergency key.
  2. Use the Emergency Key to Pry Open the Fob: Insert the emergency key (or a small flathead screwdriver) into the slot revealed after removing the key and gently twist to separate the two halves of the fob.
  3. Carefully Remove the Old Battery: The battery may be held in place by a small clip. Use the screwdriver to gently pry it loose.
  4. Insert the New Battery: Make sure the positive (+) side of the battery faces up (typically towards the inside of the fob’s cover).
  5. Reassemble the Fob: Snap the two halves of the fob back together until they click securely.
  6. Reinsert the Emergency Key: Slide the emergency key back into its slot until it locks into place.

Step-by-Step Guide: Replacing the Battery in a Subaru Standard Key Fob (Push-Button Start)

  1. Locate the Emergency Key Release: Similar to the flip key fob, find a small button or latch on the back of the fob and release the emergency key.
  2. Insert the Emergency Key into the Slot: Look for a slot (often near the key release mechanism) where the emergency key can be inserted.
  3. Twist or Pry to Open: Gently twist or pry the emergency key (or a small flathead screwdriver) to separate the two halves of the fob.
  4. Carefully Remove the Old Battery: Similar to the flip key fob, the battery may be held in place by a clip.
  5. Insert the New Battery: Ensure the positive (+) side faces up.
  6. Reassemble the Fob: Snap the two halves back together until they click securely.
  7. Reinsert the Emergency Key: Slide the emergency key back into its slot.

Troubleshooting Common Issues

  • Fob Won’t Open: Ensure you are using the correct opening method for your fob type. Apply gentle but firm pressure. If still stuck, try a different prying tool.
  • New Battery Doesn’t Work: Double-check the battery polarity (+/-). Make sure the battery is new and not expired. Clean the battery contacts inside the fob with a cotton swab and a small amount of rubbing alcohol.
  • Fob Still Doesn’t Work After Battery Replacement: Your fob might need to be reprogrammed, though this is rare after a simple battery replacement. Consult your owner’s manual or a Subaru dealership for reprogramming instructions.

Safety Precautions

  • Battery Disposal: Dispose of old batteries properly at a designated recycling center or hazardous waste facility.
  • Avoid Excessive Force: Don’t force the fob open, as this could damage the casing or internal components.
  • Keep Batteries Away From Children: CR2032 batteries are small and can be a choking hazard.

Choosing the Right Replacement Battery

While most Subaru fobs use a CR2032 battery, always verify this by checking your owner’s manual or the old battery. Using the incorrect battery type can damage the fob. Reputable brands like Panasonic, Energizer, and Duracell are recommended.

FAQ: How often should I replace my Subaru key fob battery?

The lifespan of a Subaru key fob battery typically ranges from 1 to 3 years, depending on usage. Signs of a weak battery include reduced range, requiring you to be closer to the car to unlock it, and intermittent failure of the fob’s buttons.

FAQ: What is the easiest way to open a stubborn Subaru key fob?

If your Subaru key fob is difficult to open, try using a plastic trim tool instead of a metal screwdriver to avoid scratching the plastic. Applying gentle heat with a hairdryer (on a low setting) briefly can also help loosen the casing.

FAQ: Can I use any CR2032 battery for my Subaru key fob?

While you can use any CR2032 battery, it’s recommended to use a high-quality battery from a reputable brand for optimal performance and longevity. Cheap, generic batteries may not last as long.

FAQ: Will replacing the battery erase my key fob’s programming?

In most cases, replacing the battery will not erase your key fob’s programming. However, very rarely, the fob may need to be resynchronized with the car. Consult your owner’s manual for instructions.

FAQ: What if I break my Subaru key fob while replacing the battery?

If you accidentally break your Subaru key fob while replacing the battery, you’ll likely need to purchase a replacement fob from a Subaru dealership. Programming the new fob will also be required.

FAQ: How much does it cost to have a Subaru dealership replace the key fob battery?

The cost to have a Subaru dealership replace the key fob battery can range from $30 to $75 or more, depending on the dealership and labor charges. It’s significantly cheaper to do it yourself.

FAQ: My Subaru key fob has a screw; how does that change the battery replacement process?

If your Subaru key fob has a screw, you’ll need to use a small screwdriver (usually a Phillips head) to remove it before attempting to open the fob. The screw is typically located on the back of the fob.

FAQ: What should I do if my Subaru key fob still doesn’t work after replacing the battery?

If your Subaru key fob still doesn’t work after replacing the battery, try cleaning the battery contacts inside the fob with a cotton swab and rubbing alcohol. If that doesn’t work, the fob may need to be reprogrammed by a dealership.

FAQ: Can I replace the battery in my Subaru key fob with the car battery?

No, you cannot replace the battery in your Subaru key fob with the car battery. The key fob uses a small coin cell battery (CR2032), while the car uses a much larger 12-volt battery.

FAQ: Where can I buy replacement CR2032 batteries for my Subaru key fob?

You can buy replacement CR2032 batteries at most drugstores, grocery stores, electronics stores, and online retailers like Amazon.

FAQ: Does my Subaru key fob warranty cover battery replacement?

Typically, the factory warranty does not cover routine maintenance items like battery replacement in your Subaru key fob. However, check your warranty documentation for specific details.

FAQ: Is there a specific tool designed to open key fobs?

Yes, there are specific tools designed to open key fobs, often called key fob pry tools or plastic trim tools. These are made of plastic to prevent scratching the fob’s casing and can be found online or at auto parts stores.

Leave a Comment